Advanced Settings

To enter the settings menu, press and hold in the temperature adjustment. Once enter toggle the temperature adjustment left or right to scroll through the menus. Once the desired menu is found press and hold in the temperature adjustment till the menu is opened. To change the value, first select it. Then Toggle the Temperature adjustment left or right to raise or lower the value.

Setting Menu Key:

ATC- Advanced Temperature Calibration- If you Iron temperature readout is inaccurate you can calibrate it by: Setting the set temperature to a specific value (ie-300C) then measuring the actual temperature with a High temperature thermometer. Once the actual value is determined subtract the difference and enter the value in to this menu.

HSL- Adjusts screen brightness, 2 is the darkest 200 is 100 is the brightest.

DMH- Auto cool down, when this is set to “DMH ON 5” the soldering iron will begin to cool down after 5 seconds in a resting position. Once the Iron is picked back up by the user it will begin to reheat. If this value is set to “OFF” the soldering iron will stay on well powered.

LED- Screen auto shut off, when this is set to “LED ON 5” the soldering iron’s screen will turn off after 5 seconds in a resting position. Once the Iron is picked back up by the user the screen will re illuminate. If this value is set to “OFF” the screen will stay on well powered.

LAG-Language

IMA- Screen Orientation

RTN-Return

Gallery

Want to print your doc?
This is not the way.

Try clicking the ··· in the right corner or using a keyboard shortcut (

CtrlP

) instead.