CS
** Capability
It allows a relatively large print volume (330 x 240 x 300 mm).
It also prints in good layer resolution for a consumer-level FFF3D printer.
It’s a dual nozzle printer – you can put two materials in one print. Typically, the second material will be , a water-soluble support material that allows the printing of complex shapes. Or, it could be a functional material such as or .
** Constraints
Printing takes a quite long time. To print an object of ~2.5 cm^3 volume, it will take about an hour with a medium print quality (0.2 mm layer thickness).
The material is not cheap. The 2.5 cm^3 object will consume 1 m of a filament. You will be able to print ~100 copies of the model with one roll of standard filament type (750g), which is ~$58.
If you want to print a large volume or use it for teaching, you will need to source materials from your funding or education funding.
Here is the list of . I would strongly recommend using them to minimise maintenance, unless there is a good reason to use a 3rd part material.
** How to use
We will first have an STL file or 3MF file to print. You slice it with . There you can set the resolution, material type, etc. If you are happy, you slice it and put the generated file in the printer via a USB stick. Then you can start printing it on the printer.
CTL
Engineering
LES stores