Heater Related
Check and log the following and relay the following information to your supervisor.
Is the Rocker Switch Illuminated in the on position? Is the burner light illuminated when a valve is opened, does it turn off when you close the valve. Do you have Diesel in your tank ? What is your Diesel Fuel Pressure? Should be 125PSI with a valve open What is the Voltage to the Burner ? Overview Video
Check The Rocker Switch For Illumination - Video
Replace Rocker Switch.
Check The Burner Diagnostic Light, What Does the light do? -
Replace and prime the RT12 filter
Check The Diesel Fuel Pressure - Video
How To Inspect The 30 AMP Burner Fuse - Video
How to replace a 12v burner switch - Video
Hose Replacement
Change Hose to Gun, Include install zip tie on leak area
Change Hose From ZK1 to Inlet of Heat Exchanger - Video
Video Coming Soon
Change Hose From Heat Exchanger to the ZK1
Video Coming Soon
Hydraulic Hose Replacement:
Spill Kit Contents & Use
Valves & Gauges
Change 6000 PSI Rupture Disk What it does and why - Video
Change 4500 PSI Relief Valve - What it does & Why Video
How to Remove a broken lance from the gun with an easy out.
Video coming Soon
Rip Saw
Disassemble inspect and clean filter.
Replace O-ring on Rip Saw.
Installing a temporary spray tip on lance.
Pressure related Issues
Low Pressure Water Surging
Check and log the following items prior to calling your supervisor
Check water level in tank Check water filter for obstructions Check the ZK1 shuttle for damage Related Videos
, what's its function? - Redo this video Disassemble inspect and clean filter. Video Coming Soon
Replace O-ring on Rip Saw
Electric Related
