Electrical Task Tracking

INVENTORY

Board Status Page

Current Sprint

Product Backlog

Extraneous Information

Things To Do As Leadership (Core + Electrical)

Explore

INVENTORY

A coping mechanism so I don’t cry

Electrical Inventory

Electrical Inventory

Item

What We Should Have

What We Actually Have

Notes

BMS Boards

3 of Each Assembled (Core, CSC, Data Acq)

Non Assembled boards

Non Assembled Boards from Calpak because yea, they felt bad or smth

We know we have 2 BMS Core, 3rd one should exist? The one populated by Calpak has issues so Ian W. will try to fix it?

Thermal sensing boards, spare bms boards, spare HV boards, the HV boxes in LPB?

Open

Nostril Boards

3 of Each Assembled (BSPD, Dashboard, Throttle, Motherboard)

Dashboard Pi Hat (Incorrect one though)

Open

Charging Board

3 of Each Assembled

Open

Segments

Needs to be ordered....?

Open

Service Section Boards

3 of Each Assembled (Air Control, IMD Latch, Motherboard, Pre/Dis charge, Tsal)

Extra non assembled boards

Imd bender insulation monitoring board. (3x)

Open

Wires

Solid & Stranded wire (approx. 5 spools each full) 20 Gauge~

14 AWG wires

CAN Wire (White helix)

Open

Ampseals

We got almost all of them from sponsors for free, so after completion of MKVI we should go through and reduce all the different types we have

List of Ampseals we have: 14 Pos amp seal vertical HDR Header assy 35 pos vertical Conn plug assy 23 pod sealed Conn header R/A 23Pos 4mm 23P V HDR Assy W/Gasket Conn plug 35 POS free hanging blk

Open

Crimps & Connectors

So SO many

Ring terminals

Huge ones

Ones for CAN wire, etc, did a vague overview will go more in depth later

Open

CAN Connectors

USB to can compact 4 CAN dongles + Rasberry Pi (lower left shelf Canakit rasberry pi model 3 complete starter kit (for HITL)

Open

Parts

Shutdown bottoms (red ones x2) Heat shrink tubing (lots of kit) Jumper wire kit Connectivity automotive wire connectors Fuse bolt

Open

Spool of 1/2’’ Heatshrink & 1’’ Heatshrink

Open

Braided Sleeves

1/2’’, 1/4’’, 1/8’’

Open

Texktronix Osciliscopes, stuff on top of workbench

with calibration board, digital probe, and etc.

Open

Formula box for cell testing

Probably mechanical stuff. Andrew P’s enclosures are in there

Open

Eval Boards Box

Linear technology Boards

isoSPI 12 cell battery stack monitor boards (x5) with accompanying ribbon cables

Linduino One (x1)

isoSPI two wire serial interface (x2)

Teensy 4.0 (32 bit arduino-compatible microcontroller)

Labjack U3-HV (USB DAQ device with analog inputs, I/O, dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.)

Open

Telemetry/Sensing Bucket

sensing bucket

5inch HDMI LCD

Telemetry radio

Spare atlas

RobotDyn MEGA atmega 2560 board?

NXP semiconductors BL sensors board

Avr board & AVR pocket programmers (x2) & full speed usb isolator (3x)

GNSS/ GPS module

Lopo battery voltage tester low voltage buzzer alarm

ACHS-7124 Current sensor carrier -40A to +40A (x2) & ACHS-7121 current sensor carrier -10A to +10A

JLCPCB box: lsensing + BMS board + Atlas

Open

E-Meter

We used to get one every year for free from FSAE, but due to supply demand issues they don’t give us free stuff anymore T _ T

We should have like 3(?), one is broken. They might need to be reprogrammed or smth because E-meter test standards may have changed or smth.

Open

There are no rows in this table

⁠

Want to print your doc?
This is not the way.

Try clicking the ⋯ next to your doc name or using a keyboard shortcut (

CtrlP

) instead.