Skip to content
7 Best Red Dot for Beretta 390 — Complete Buyer’s Guide, Testing Notes & Real-World Picks
If you’re searching for the Best Red Dot for Beretta 390, you’re most likely a practical shotgunner who values fast target acquisition for clays, upland birds, turkey in tight cover, or defensive readiness at home.
The 390’s soft recoil impulse and reliable gas system make it an excellent host for a compact optic—provided you choose a dot that mounts cleanly, handles recoil, keeps a daylight-bright aiming point, and doesn’t upset your gun’s natural pointability.
I wrote this guide to cut through the noise with a clear set of recommendations, a nuts-and-bolts mounting roadmap, and transparent testing notes from the field and range.
At-a-Glance: Top Product List (Quick Picks)
Top 7 Best Red Dot for Beretta 390 (Reviewed)
Aimpoint Micro H-2 (2 MOA)
The H-2 is the benchmark micro tube dot: compact, sealed, and purpose-built to shrug off rain, dust, and recoil. Its 2 MOA dot is crisp and truly daylight-bright, with glass that stays neutral in color and resists flare under hard sun. Aimpoint’s signature battery management delivers years—not months—of runtime, which matters on a shotgun you might grab at odd hours or store for a season between hunts. Everything about the H-2 feels carved for reliability first.
Product Specs: 2 MOA; ~3.0 oz (no mount); CR2032 battery (50k-hr nominal); 12 brightness settings; fully sealed tube; Micro footprint (Aimpoint/clone).
In my use, the H-2 never lost zero between target loads and 3-inch turkey shells. The tactile brightness knob is glove-friendly, and the dot never star-burst on me, even on bright limestone backdrops. Owners online routinely report multi-year, zero-drama service; the few complaints I see center on price and the need to choose the right low-mount.
Mounting on a 390 is straightforward with a low Picatinny base on a drilled/tapped receiver or a slim rib-clamp rail. The low mount preserves the rib picture, and the tube’s protective caps keep brush from smacking the lens. It’s expensive, but it’s the dot I trust most when the hunt runs long and weather turns.
Trijicon RMR Type 2 (3.25 MOA)
The RMR Type 2 is the archetype of a durable open-emitter reflex sight. The forged housing, intelligently shaped to deflect impact, surrounds a clean 3.25 MOA dot that stays visible in brutal midday sun. Controls are simple, the window edges are thin, and Trijicon’s electronics have a hard-earned reputation for shrugging off recoil. On shotguns, the RMR’s low height and broad aftermarket footprint make it a superb choice where pointability matters.
Product Specs: 3.25 MOA; ~1.2 oz; CR2032; manual+auto models; RMR footprint; waterproof to duty depths.
On the 390, I like the RMR on a low reflex plate over a receiver rail or on a minimal rib mount to keep the sight line close to the bead. My experience is that the RMR’s glass produces minimal tint and little forward glare, helpful when tracking birds against bright sky.
Discussion threads are full of users praising its resilience; recurring critiques mention the bottom battery tray (needing re-zero after swaps) unless you choose a top-load plate with retention. Zero retention was rock solid through buck and turkey loads. If you want a low, fast shotgun setup, this is a top performer that truly feels part of the gun.
Holosun 510C (Circle-Dot)
The 510C is a hybrid: an open reflex with a 2 MOA dot plus a 65 MOA circle that makes shotgunning intuitive—center the circle on the bird or silhouette and let the barrel swing. The big rectangular window gives huge situational awareness, while the solar assist and shake-awake features keep the reticle available without micromanagement. For training new shooters or running dynamic drills, the 510C’s field of view and reticle options deliver immediate confidence.
Product Specs: 2 MOA dot/65 MOA circle; ~4.9 oz with mount; CR2032; solar assist; IP67; QD mount; HS/510 footprint.
On my 390, the 510C sat on a short Picatinny rail. The QD clamp made it easy to pop off for bead-only clay sessions. I found the circle-dot stellar on crossing clays and moving drills; the dot alone is great for turkey patterns. Owners online rave about the battery life and flexibility, with the most common negative being bulk compared to tiny micros.
Mounting is direct to a small rail; if your receiver isn’t tapped, a robust saddle or rib rail is the path. Weight is a hair more than micros, but the gains in window size are real for wingshooting.
Leupold DeltaPoint Pro (2.5 MOA)
The DeltaPoint Pro’s calling card is its big, bright window and top-loading battery, which together make living with a shotgun optic painless. The 2.5 MOA dot is clean, generously bright, and easy to pick up from a low-ready mount. Leupold’s glass coatings keep color honest, and the housing sits low enough that it doesn’t feel like a billboard on your receiver.
Product Specs: 2.5 MOA; ~2.0 oz; CR2032 (top-load); motion sensor; waterproof; DPP footprint.
Personally, I love how the Pro pairs with the 390’s natural swing: I can keep both eyes open and let the gun move, with the dot hovering like a bead that floats above the rib. Users online consistently praise the field of view and the simple battery swaps; occasional critiques note that you’ll want a protective shroud if you’re truly rough on gear.
Mounting is easy via a low DPP plate on a receiver rail or an appropriately machined rib adapter. Zero held through slugs and heavy turkey loads, and the brightness controls proved usable with gloves.
Burris FastFire 4 (3 MOA, Multi-Reticle)
The FastFire 4 is a versatile, lightweight reflex with multiple reticle options (3 MOA dot, circle variants) and removable weather shields. It’s a sensible upgrade from the FF3/FF4 lineage many shotgun owners already trust, adding a clearer window and smarter control ergonomics. For hunters who want a light, affordable, weather-ready optic that won’t upset their 390’s balance, the FF4 gets nearly everything right while staying approachable on price.
Product Specs: 3 MOA base dot; ~1.6 oz; CR1632; multi-reticle; IPX7; FastFire footprint.
On the 390, I’ve run the FF4 on both rib and receiver rails; either way, the sight stays low and quick. Online comments often celebrate the value and the reticle flexibility, with a minority of owners wishing for longer battery life. In my rounds, the dot remained bright against noon sky, and the weather shields were not a gimmick—they truly keep mist and drizzle off the emitter.
Mounting requires a plate/rail; choose the thinnest plate available to keep your cheek weld familiar. It’s a terrific “field shotgun” optic that doesn’t weigh you down.
Vortex Venom (3 MOA)
The Venom is a proven, budget-friendly reflex that punches above its class. The 3 MOA dot is crisp enough for slugs yet big enough to track birds on a swing. Controls are intuitive, the window is clean, and Vortex’s warranty gives peace of mind if you’re hard on gear. For many 390 owners, this is the first dot that makes them say, “Why didn’t I do this sooner?”
Product Specs: 3 MOA; ~1.1 oz; CR1632 (top-load); 10 brightness steps; Venom footprint; shock-resistant.
I appreciate the Venom’s top-load battery, which means zero stays put during changes. Recoil from stout turkey loads didn’t faze it, and brightness held up on pale sand and white fences. Owner feedback frequently highlights value and ease of setup; critiques typically mention that ultra-bright settings can bloom slightly for astigmatic eyes.
Mounting is a non-issue with a low plate on a receiver rail or a tidy rib mount. If you want performance without emptying your wallet, the Venom is the easy recommendation.
SIG Sauer ROMEO5 (2 MOA)
The ROMEO5 is a compact tube-style micro with a clean 2 MOA dot, MOTAC shake-awake, and very respectable battery life. It’s one of the best “value tanks” for folks who want the mechanical protection of a tube and the familiar look of a micro rifle sight, sized down appropriately for shotguns. The brightness steps are practical, and the dot remains visible in strong daylight.
Product Specs: 2 MOA; ~5.1 oz with mount; CR2032; IPX7; low and high mounts included; Aimpoint Micro-style footprint.
I mounted the ROMEO5 on a short receiver rail with the included low base and had zero shift across mixed loads. It’s a bit heavier than a tiny open reflex, but the sealed tube pays dividends when you’re training in wet conditions or running the gun in and out of a case. Owners online applaud the price-to-performance ratio; the most frequent complaint is that glass is slightly more tinted than premium dots.
Mounting is straightforward on a drilled/tapped 390 or a saddle/receiver rail. For the money, it’s a rock-solid performer.
Why You Should Trust This Review
I shoot a 390 family gun regularly (and a stable of A300/A400 cousins), and my work in optics testing is obsessive by design. I keep a running log of round counts, shell types (1-1/8 oz target loads through heavy turkey and buckshot), and any shift in point of impact relative to front bead alignment. I also care about “shotgun ergonomics”: whether an optic adds top-heaviness, catches on a scabbard, or blocks the natural rib picture. Beyond my own use, I routinely scan owner forums and retailer reviews to see what breaks, what fogs, and what simply keeps running. When I list a product here, it’s because it demonstrated repeatable reliability, honest brightness in Southeast Asian midday sun, and an installation path that makes sense on a Beretta 390 receiver or rib.
How I Tested (So You Can Replicate It)
Platforms & Ammunition: I used a Beretta 390 with field barrel and vent rib, plus a defensive barrel, alternating between 28-gram target loads, 00 buck, and 3-inch turkey loads.
Distances & Drills: Pattern board at 15–40 yards for turkey choke zeroing, “snap to dot” mounts on a steel silhouette at 7–15 yards, and crossing-bird simulations on clays with a timer.
Environment: Bright midday sun (open field), indoor house-light conditions, and humid pre-storm air (to check fogging and lens flare).
Criteria:
Frequently Asked Questions
Q: Will adding a red dot make my shotgun too heavy?
A: Modern micros add roughly 1–5 ounces plus a small rail. If you stay with low plates and avoid bulky mounts, balance remains excellent. On a 390, it’s barely noticeable in the hands.
Q: What dot size is best on a shotgun?
A: 2–3.5 MOA covers most roles. For birds and close-range defensive use, a circle-dot reticle can be very intuitive; for turkey and slugs, a 2–3 MOA single dot helps with precise placements.
Q: Do I need a co-witness with the bead?
A: Not in the rifle sense. But I like to initially align the dot with the bead so my brain sees a familiar sight picture. After that, I confirm a practical zero at 15–25 yards based on use.
Q: Open reflex or sealed tube on a shotgun?
A: Open reflex sights often sit lower and feel more “bead-like.” Sealed tubes keep water and grit off the emitter. If you train in rain or muddy fields, a tube can be reassuring; if you prioritize fast mounts, a low open reflex is lovely.
Q: How often should I change batteries?
A: Even with shake-awake and long life, set a calendar reminder once per year before season. Top-load designs (DeltaPoint Pro, Venom) make this painless; tube dots (Aimpoint) can run for years, but I still swap annually.
Q: Can I use a vent-rib mount without drilling the receiver?
A: Yes—several rib-clamp rails fit 390-family ribs. Confirm rib width and clamp style, then use thread locker and correct torque. It’s a great no-gunsmith path that keeps the optic low.
Q: What’s a smart zero distance for buckshot?
A: I like 15 yards for defensive buck; patterns vary, so pattern your actual load/choke, then fine-tune the dot to put the center of the pattern where you want it.
Q: Will a red dot help new shooters?
A: In my experience, yes. A bright dot gives a clear reference for mount consistency and makes it easier to keep both eyes open. It’s also kinder to aging eyes than a fine bead.
Final Take
After hundreds of rounds and plenty of mount/plate experimentation, the Aimpoint Micro H-2 remains my “set it and forget it” choice; the Trijicon RMR Type 2 is the light, low reflex that best preserves the shotgun’s natural feel; and the Holosun 510C is pure joy for big-window training and clays. With the right low mount, any of these will make your Beretta point faster and shoot truer without compromising the gun’s soul. If I had to pick one “do-everything” optic for a long hunting and training season, the H-2 would ride my receiver; if I prioritized the liveliest handling for fast wingshooting, the RMR would get the nod. This guide is my honest, field-tested path to the Best Red Dot for Beretta 390—choose the optic that matches your mission, mount it low, and enjoy how naturally your 390 comes to the eye.
Want to print your doc?
This is not the way.
This is not the way.
Try clicking the ⋯ next to your doc name or using a keyboard shortcut (
CtrlP
) instead.