Explore

Input

Tasks

Add tasks for the assignee's.

⁠

Add Chore

⁠

Clear Chores

⁠

Tasks

Tasks

Category

Task

Location

Steps

Notes

Wash Dishes

Scrape dishes to remove leftover food - use a rubber spatula or paper towel

Fill sink or dishpan with clean, hot water

Wash "in order," starting with lightly soiled items

Rinse suds and residue with clean hot water

Put dishes into dishwasher & run

Make sure to clean the dishes before placing in dishwasher

Clean Toilet

Begin by applying toilet cleaner to the bowl, and allow it to soak.

Quickly swish the cleaner around the bowl with a brush.

While the cleaner soaks in, spray the exterior of the toilet with an all-purpose disinfectant.

Use a scrub sponge to clean the exterior of the toilet. Once the exterior is clean, use a toilet brush to clean the bowl.

Use your brush or sponge to clean the underside of the rim.

Vacuum

Use the crevice attachment on vacuum cleaner first. Vacuum the edges in each room before vacuuming the carpet.

Vacuum from the furthest corner away from the door and work out of the room.

Use a neutralizer if carpet needs a little freshening.

Mow

Pay Electric Bill

Pay Utility Bill

Buy New Car

Leaking Faucet

Turn off the water supply. The last thing you want is for the problem to reverse itself and your faucet to start spouting water.

Remove decorative handle hardware.

Remove the packing nut.

Replace the O-ring and the washer.

Put everything back together.

Test task

Test Steps

Lorem Ipsum

Replace Countertops

Cut Laminate to Fit Cabinets

Check Countertop Measurements

Cut Buildup Strips

Secure Countertops to Cabinets

Join Miters Under the Countertop

Seal the Joint Between Countertops and Walls

Re-Install Sink and Appliances

Paint Vanity

Remove the cabinet doors, drawers, false drawer fronts, and any attached hardware.

Using water and the degreaser dish soap, wash off all grease and oils that normally buildup on cabinetry over time.

Use painter's tape to mask off the underside of the vanity top, adjoining walls, and floor.

Scuff sand cabinets, doors, etc.

Prime the entire surface.

Brush or roll on the first coat of paint and let dry. Then add two additional coats to protect the surfaces from daily use.

Let dry overnight; reassemble doors and hardware, or switch out old hardware for a new stylish look.

Clean Gutters

There are no rows in this table

⁠

Task List This page is a complete list of all the tasks that need to be done.⁠

Want to print your doc?
This is not the way.

Try clicking the ⋯ next to your doc name or using a keyboard shortcut (

CtrlP

) instead.