Skip to content
coordinates are set,photos for defects are selected.
Report Generating
To request a report, the inspection must be released.
Click the “Report” button
Choose the report type and set the required parameters:
Assessment Report — a combined report for both internal and external inspections.
Inspection Report — a report for a single inspection (internal or external).
Step 1 — Select Photos
Choose a Title Page photo and a General photo.
This step is optional.
If you don’t have the photos yet, you can upload them directly here.
Step 2 — Check Coordinates & Defect Photos
Make sure that:
If something is missing, the corresponding button will open the 3D Viewer so you can fix it.
Submit & Download
Click Submit.
Report generation may take from 10 minutes to several hours, depending on the number of defects.
Once the report is ready, you can download it from the same screen.
The information on this page is the intellectual property of Rapida Infrastructures Ltd. and is provided for reference purposes only. Copying, transferring, reproducing, distributing, or using this information for commercial purposes without prior written permission is strictly prohibited.
Want to print your doc?
This is not the way.
This is not the way.
Try clicking the ··· in the right corner or using a keyboard shortcut (
CtrlP
) instead.