Skip to content
3.25 MOA or 6.5 MOA dotForged aluminum housingBattery: CR2032 (bottom load)Footprint: RMRWeight: 1.2 ozIndustry-leading durabilityExcellent recoil resistanceProven track recordBottom battery requires removalNoticeable blue lens tint
2 MOA dot + 32 MOA circleSolar failsafeSide battery trayFootprint: RMRWeight: 1.5 ozMulti-reticle systemEasy battery accessStrong valueSlightly bulkier housingTint more noticeable than premium optics
Solar charging systemInternal battery (no replacement)Direct MOS mountMulti-reticle systemWeight: 1.3 ozLowest deck height availableNo plate requiredAlways-on systemNo manual battery swapLimited brightness override control
2.5 MOA dotMotion sensor activationTop-load batteryFootprint: DeltaPoint ProWeight: 2.0 ozHuge windowClear glass with minimal tintEasy battery accessTaller deck heightLess rugged than RMR
3.5 MOA dotFully enclosed emitterBattery: CR2032 (side load)Footprint: ACROWeight: 2.1 ozCompletely sealed emitterOutstanding battery lifeMilitary-grade durabilitySmaller windowRequires specific plate
3.3 MOA dotFully enclosed emitterSide batteryFootprint: ACROWeight: 2.05 ozLarger window than ACROFully sealed designRobust constructionSlightly heavierLess aftermarket support
More
Share
Explore
6 Best Red Dot For Glock 47 Mos in 2026: Mounting & Compatibility
The Best Red Dot for Glock 47 Mos is not just about brand reputation—it’s about matching footprint compatibility, durability, and real-world shooting performance to a duty-sized pistol that’s built for reliability. I’ve spent extensive time testing optics on MOS platforms, and the Glock 47 presents unique considerations: slide mass, recoil impulse, and mounting plate interface all affect optic performance.
In this guide, I break down six optics that truly perform on the Glock 47 MOS system. I focus on real handling characteristics—parallax behavior, emitter occlusion, glass clarity, and how each optic holds zero under repeated recoil cycles.
Top Product List: Best Red Dot for Glock 47 Mos
Trijicon RMR Type 2
image.jpeg
image.jpeg
The RMR Type 2 is the benchmark for duty pistol optics, known for extreme durability and consistent performance under recoil.
Specs
Pros
Cons
My hands-on notes
The RMR’s deck height allows for a solid lower 1/3 co-witness with suppressor sights on MOS plates. Parallax is minimal at typical pistol distances, though slight shift appears at extreme angles. The emitter is partially exposed, so occlusion from debris is possible, but the housing design protects it well. Button tactility is stiff but glove-friendly.
What people say online
Users consistently report unmatched durability. Many law enforcement discussions highlight its ability to survive tens of thousands of rounds without losing zero.
Mounting clarity
Requires Glock MOS RMR plate or aftermarket plate for best fit.
HOLOSUN 507C
image.jpeg
image.jpeg
The 507C offers a feature-rich alternative with multiple reticle options and solar backup.
Specs
Pros
Cons
My hands-on notes
The side battery tray is a major advantage—no need to re-zero. Parallax is well-controlled, though slightly more noticeable than the RMR at off-axis viewing. The window is generous, aiding fast acquisition. Buttons are tactile even with gloves. Minimal distortion near edges.
What people say online
Shooters praise its value and versatility. Some note long-term durability is slightly below premium brands, but still highly reliable.
Mounting clarity
Directly compatible with MOS RMR plate—no modification needed.
HOLOSUN SCS
image.jpeg
image.jpeg
The SCS is purpose-built for Glock MOS, eliminating the need for adapter plates entirely.
Specs
Pros
Cons
My hands-on notes
This optic sits incredibly low, giving near-perfect co-witness with standard-height sights. Parallax performance is excellent due to optimized geometry. The auto-brightness system works surprisingly well, though in transitional lighting it can lag slightly. No emitter occlusion issues in testing.
What people say online
Users love the seamless integration with Glock MOS slides. Some prefer manual brightness control, but most appreciate the simplicity.
Mounting clarity
Direct mount to MOS slide—no plate required.
Leupold DeltaPoint Pro
image.jpeg
image.jpeg
The DeltaPoint Pro stands out with its large window and excellent glass clarity.
Specs
Pros
Cons
My hands-on notes
The window size makes target tracking extremely fast. Parallax is minimal, though edge distortion is slightly more noticeable due to the large lens. Co-witness requires taller suppressor sights. The top battery design is convenient and well-sealed.
What people say online
Competition shooters love the window size. Some durability concerns exist compared to closed emitters.
Mounting clarity
Requires MOS DeltaPoint plate.
Aimpoint ACRO P-2
image.jpeg
image.jpeg
The ACRO P-2 is a fully enclosed emitter optic designed for extreme environments.
Specs
Pros
Cons
My hands-on notes
The enclosed emitter eliminates occlusion issues entirely—rain, mud, and dust are non-issues. Parallax is extremely well controlled. The smaller window takes adjustment but becomes natural with training. Button controls are crisp and glove-friendly.
What people say online
Widely praised for reliability in harsh conditions. Some users note the window size tradeoff.
Mounting clarity
Requires MOS ACRO plate or aftermarket adapter.
Steiner MPS
image.jpeg
image.jpeg
The Steiner MPS combines enclosed emitter durability with a larger viewing window than most closed designs.
Specs
Pros
Cons
My hands-on notes
The MPS offers a noticeable improvement in field of view compared to ACRO-style optics. Parallax is minimal, and the glass has very low tint. Co-witness is achievable with suppressor sights depending on plate height. Controls are firm and tactile.
What people say online
Users appreciate the balance between durability and usability. Often compared favorably to ACRO.
Mounting clarity
Uses ACRO footprint—requires MOS plate.
How I Tested / Evaluation Criteria
Parallax
I evaluated parallax by shooting at varying distances and deliberately shifting eye position. The best optics showed minimal shift inside 25 yards. Closed emitter optics generally performed slightly better due to internal alignment consistency.
Co-witness / Deck Height
Deck height determines whether you can co-witness with iron sights. Lower optics like the SCS provide near-perfect alignment, while taller optics require suppressor-height sights for backup aiming.
Durability
I focused on recoil endurance and housing strength. The Glock 47’s slide mass generates consistent impulse, exposing weak optics quickly. Forged housings and enclosed emitters performed best.
Battery
Battery access and longevity matter. Side-load designs are ideal. Auto-on features reduce management but can introduce unpredictability.
Brightness Range
I tested optics in bright sunlight and low-light conditions. A usable range must include daylight-bright settings without blooming and low settings for indoor use.
Glass Quality
Clarity, tint, and distortion were critical. Excessive blue or green tint can reduce target contrast. Edge distortion affects tracking.
Controls Ergonomics
Button feel matters under stress. I tested with gloves—soft buttons are a liability. Raised, tactile controls are ideal.
Mounting Ecosystem
MOS compatibility is key. Optics that require fewer plates or offer direct mounting provide better reliability and lower stack height.
How to Choose the Right Red Dot for This Gun
Choosing the right optic for a Glock 47 MOS isn’t just about picking a popular model—it’s about understanding how the optic interacts with the platform. The MOS system introduces an interface layer that directly affects reliability, zero retention, and sight height.
First, consider footprint compatibility. The Glock MOS system uses plates, and each plate introduces potential tolerance stacking. Optics like the Holosun SCS eliminate this entirely by direct mounting, which improves durability and reduces deck height. If you go with RMR or ACRO footprints, invest in a high-quality plate.
Next is emitter type. Open emitters (RMR, 507C) are lighter and often have larger windows, but they are susceptible to debris. Closed emitters (ACRO, MPS) offer superior reliability in harsh environments. If you carry or train outdoors frequently, enclosed optics are worth the tradeoff.
Window size and acquisition speed are also critical. Larger windows like the DeltaPoint Pro allow faster target acquisition, especially under stress. However, they often come with increased size and reduced durability.
Battery design matters more than most shooters realize. Side-loading batteries are ideal because they allow replacement without removing the optic. Bottom-loading designs require re-zeroing, which adds maintenance overhead.
Co-witness capability should not be overlooked. Lower deck height optics allow use of standard or slightly taller irons, while taller optics require suppressor-height sights. This affects your backup aiming system significantly.
Finally, consider real-world durability. The Glock 47 is often used in duty roles, so your optic must survive repeated recoil cycles without losing zero. Proven designs like the RMR and ACRO dominate in this category.
FAQs
1. Do all optics fit the Glock 47 MOS directly?
No. Most require MOS plates. Only specific models like the Holosun SCS mount directly.
2. Is enclosed emitter worth it?
Yes for duty or harsh environments. It prevents emitter blockage from debris.
3. What MOA dot size is best?
3–3.5 MOA is ideal for balance between precision and speed.
4. Can I co-witness with stock sights?
Usually no. Most setups require suppressor-height sights unless using low-profile optics.
5. How often should I change batteries?
Annually is a safe rule, even for long-life optics.
Conclusion
The Best Red Dot for Glock 47 Mos ultimately depends on your intended use, but after extensive testing, durability and mounting reliability stand out as the most critical factors. Whether you choose a rugged open emitter like the RMR or a sealed system like the ACRO, the key is ensuring consistent performance under recoil and maintaining a solid mounting interface.
Want to print your doc?
This is not the way.
This is not the way.
Try clicking the ··· in the right corner or using a keyboard shortcut (
CtrlP
) instead.