Skip to content

Design Process

Below is the design process for your outdoor design.
We offer this proposal, including all original concepts and designs, with the agreement that you will not share them publicly, on social media, or with outside contractors without the permission of Pratt Guys. We do encourage you to share the site internally with your family and friends and build excitement for your project!

Design Waivers

Scope of Work Waiver: The design presented is conceptual in nature and does not define the final scope of work. Refer to your approved invoice on Buildertrend for a complete and accurate description of your included scope of work. Features or elements depicted in the design that are not specifically included in the approved invoice are not part of the contracted scope, regardless of their appearance in renderings or drawings.
Color and Selection Waiver: The drawings' materials and colors are for conceptual purposes only and may not represent your final selections. The Material and Color Selection Finalization Form takes priority over any shown materials or colors. Please note that actual colors may vary from what is seen on monitors or when printed.
Landscape Waiver: Any landscaping depicted on renderings is for conceptual purposes only. Landscape plan will verify specific plant species and sizes.
Survey Waiver: The design presented is based on the survey information provided by the client. Tree locations, topography, and other site-specific details are subject to verification and may require adjustments to ensure accuracy in implementation. Any discrepancies in the survey data could impact final design elements.
Special Features Waiver: Depictions of special features such as water and fire features are for conceptual purposes only. The velocity and volume of the water or fire will vary.
Engineering Waiver: Structural elements depicted on renderings are for conceptual purposes only. Engineering takes precedence over the size, location, and products used for structural masonry, wood framing, roofing, floors, etc.

ARCHIVE

Last Updated on 7-25-25

Renderings


Last Updated on 7-22-25

Project Details

Gibson_STRUCTURES 7-22-25_14.jpg

Last Updated on 7-2-25

Renderings


Last Updated on 7-1-25

Project Overview

Gibson_Design Guide 7-1-25 PROJECT OVERVIEW.jpg

Project Details

Gibson_Design Guide 7-1-25 KITCHEN.jpg
Gibson_Design Guide 7-1-25 LOW VOLTAGE.jpg
Gibson_Design Guide 7-1-25 110 ELECTRICAL.jpg
Gibson_Design Guide 7-1-25 STRUCTURES.jpg

Renderings


Last Updated on 6-17-25

Project Overview

Gibson_Design Guide 6-16-25 PROJECT OVERVIEW.jpg

Project Details

Gibson_Design Guide 6-16-25 LOW VOLTAGE.jpg
Gibson_Design Guide 6-16-25 110 ELECTRICAL.jpg
Gibson_Design Guide 6-16-25 KITCHEN.jpg
Gibson_Design Guide 6-16-25 STRUCTURES.jpg

Last Updated on 6-12-25

Renderings

Last Updated on 5-29-25

Renderings

Click the image below to open gallery of project renderings.

Feasibility Study

Primary/Attached Structure Setbacks
Front Property Line - 20'
Side Property Lines - 5'
Rear Property Lines - 10'
Max Height for Accessory Structures
35' or no greater than the height of the existing house
Accessory Structure Setbacks (Must be 10' away from house to qualify as an accessory structure)
Side Property Lines - 5'
Rear Property Lines - 5'
Max Height of Accessory Structures
15'
Max Impervious Surface Ratio
None
Max Lot Coverage by Buildings (Any structure with a solid roof)
55% of lot
No Structures or Hardscape permitted within 25’ Drainage Easement
228 PALM CREST SURVEY.jpg

Sun Study

Shade-Study-Fast.gif

Project Goals

Outdoor living space for:
Entertaining guests
Cooking and dining
Sitting by the fire
Watching sports or movies outside
Relaxing and meditating
Screened in lanai (retractable screen and screen door)
Outdoor Kitchen (grill and refrigerator)
Pergola
Fire pit with seating (4 Adirondack chairs)
TV and speakers
Retaining walls and steps
Privacy from neighbors

Preliminary Layout

Layout A

OPTION A.jpg

Layout B

OPTION B.jpg

Layout C

OPTION C.jpg






Want to print your doc?
This is not the way.
Try clicking the ··· in the right corner or using a keyboard shortcut (
CtrlP
) instead.