Skip to content
AT 209 - Lab 10 - Motors and Controls
I was unable to do this lab on 11/14/25 as I had my Instrument Stage Check. I met with Anestis, AT 209 TA, on Wednesday 11/19/25 and completed the lab.
The purpose of this weeks lab was to build the TX/RX and making sure the DATX was up to date. We first had to solder the TX/RX together. I’m not sure how this went as I was flying while Jacob did the soldering part. It seemed to go well because it works and Anestis did not ask me to redo it on Wednesday. We then used the diff-checker provided to us to change a few things in the code. We then made sure we uploaded the right version to the DATX. The version table is available below.
Parameters Version Control
Date
FCU Version
File
Notes
11/19/2025
1.27.1
Open
Open
Open
Open
There are no rows in this table
We were also tasked to create a wiring diagram for the believer. The diagram is available below to view.
5fecc4b0a98513beb57aa40d24935967d9b69f083eb66e9aa112fc20ab0ebc4f04b67420a1d6f52efcbc94377a558a4dbb3a61eb11de7fa1bd91cb506f38999ed57f3891e39c8e0b58625763e2a5096e2fb79f929361f915b648260a78d3f245453462da.pdf
91 KB
Want to print your doc?
This is not the way.
This is not the way.
Try clicking the ··· in the right corner or using a keyboard shortcut (
CtrlP
) instead.